数控开料机的日常维护与保养？

　　很多的新手对数控开料机不是很熟悉，俗话说：七分养三分修，板式家具开料机保养很重要!大部分开料机的老用户都知道这个概念，开料机跟汽车一样，也是保养大于维修。今天山东智拓数控机械科技有限公司为大家科普一下，数控开料机的日常维护与保养以及个细节注意事项：

　　一、数控开料机的清理

　　在客户维护数控开料机的时候发现：大多数用户在使用完开料机后没有及时清理，其实清理工作是非常重要的。

　　1.在加工完后，要及时清理台面和裸露在外的电器配件上的粉尘、木屑等，保持台面及机器清洁卫生。

　　2.定期清理导轨、齿条、滑块上污渍碎屑，以防止碎屑干扰导致机器在工作过程中出现问题。

　　3.定期清理雕刻机丝杠，防止丝杠上粘有异物。丝杠在设备中决定了机器的精度，而且丝杠在传动过程中也起重要的作用。

　　4.定期清理电气箱，灰尘是电路板zui大杀手，灰尘稍多就会导致电路板的运行处问题，很容易出现断点，乱跑等情况。

　　二、数控开料机的润滑

　　有些客户因为工作繁忙往往忽视了开料机注油的问题，有些客户是因为季节性原因设备好几天甚至几周不工作，也不注意设备上油工作。工作经验告诉我们，上油在数控开料机维护过程中起重要作用，正确做法为：

　　1.清理干净导轨与丝杠，可用布(不脱毛)把导轨和丝杠上的油渍和材料屑清理掉。

　　2.加油周期为每个月两次，也就是每两周一次油。

　　3.机器若长期不用，应定期加油空走，以保证传动系统的灵活性。

　　4.加完油后慢速来回走动，保证润滑油能够均匀加到导轨和丝杠上。

　　上述就是数控开料机设备日常保养和维护的zhong点，客户在日常的使用中，要注意根据具体情况进行合理的维护，可以避免故障的发生，以及延伸设备的加工寿命。

Many novices are not very familiar with CNC cutting machines. As the saying goes: seven points for maintenance and three points for repair, the maintenance of panel furniture cutting machines is very important!Most old users of the cutting machine know this concept. The cutting machine, like a car, is more maintenance than repair.Today, Shandong Zhituo Cnc Machinery Technology Co., Ltd. will popularize the daily maintenance and maintenance of CNC cutting machines and the precautions for details.：

　　1. Cleaning of CNC cutting machine

　　When the customer maintains the CNC cutting machine, it is found that most users do not clean up in time after using the cutting machine. In fact, the cleaning work is very important.

　　1.After processing, clean up the dust, sawdust, etc. on the countertops and exposed electrical accessories in time, and keep the countertops and machines clean and hygienic.

　　2.Regularly clean up the debris on the guide rails, racks, and sliders to prevent debris interference from causing problems with the machine during work.

　　3.Clean the screw of the engraving machine regularly to prevent foreign objects from sticking to the screw.The screw determines the accuracy of the machine in the equipment, and the screw also plays an important role in the transmission process.

　　4.Clean up the electrical box regularly. Dust is a big killer of circuit board zui. A little more dust will cause problems in the operation of the circuit board, and it is easy to breakpoints and run around.

　　2. Lubrication of CNC cutting machine

　　Some customers often ignore the problem of oiling the feeder because of their busy work. Some customers do not work for several days or even weeks due to seasonal reasons, and they do not pay attention to the oiling of the equipment.Work experience tells us that oiling plays an important role in the maintenance process of CNC cutting machines. The correct approach is：

　　1.Clean up the guide rail and screw, and use a cloth (without hair removal) to clean up the oil stains and material debris on the guide rail and screw.

　　2.The refueling cycle is twice a month, that is, once every two weeks.

　　3.If the machine is not in use for a long time, it should be refueled and emptied regularly to ensure the flexibility of the transmission system.

　　4.After adding the oil, walk back and forth slowly to ensure that the lubricating oil can be evenly applied to the guide rail and screw.

　　The above is the zhong point of the daily maintenance and maintenance of CNC cutting machine equipment. In daily use, customers should pay attention to reasonable maintenance according to specific circumstances to avoid failures and extend the processing life of the equipment.