标题
更多

新闻中心

详细内容

提高数控木工开料机工作效率的原则

为了提率企业采用数控开料机提高企业效益。除了性能和功能外还要哪些技巧能够提数控木工开料机的工作效率呢,下面带大家了解下提高数控木工开料机工作效率的几个原则。

1、充分性原则

就是数控木工开料机每道工序避免工序自身的浪费比如:开料工序本来设备可以一次同时开料三块板,而将其设计成两块板再如排钻工序一块板上的孔位本可以两次可完,而你将其设计成三次或四次打完,这些都会产生工序自身的浪费从而影响加工效率,要想做好这些首先一点就是相应的工艺文件,也就是开料工序要有开料图,而且要编制锯路顺序,排钻工序要有钻孔图,而且要针对不同型号的排钻有不同优化钻孔方案,同时要结合工时去进行操控。

 2、同步原则

就是数控木工开料机的零部件大方向以产品为单位,小方向以产品的单件包装件数为单位,控制各零部件尽量同时或在尽可能小的时差内达到包装工序,避免包装时等件现象这里面的中心内容其实就是工艺流程表中的工时项目产品各零部件的工时要清晰准确可操作性强综合因素考虑得到位。

3、渐进原则

一个好的工艺流程设计其实只是下一个更好的更流程设计的开端,工艺设计本身就是一个在实践中不断摸索不断完善的过程,只有更好没有。

4、质量原则

任何工序在提高功效时都不能以牺牲产品质量为代价,因为数控木工开料机的产品质量才是产品的生命,在保质的前提下才能化的量产。

In order to increase the rate of enterprises using CNC cutting machine to improve the efficiency of enterprises. In addition to performance and function, what skills can improve the efficiency of CNC woodworking opener? Here are several principles to improve the efficiency of CNC woodworking opener.

1. The principle of adequacy

Is the CNC woodworking cutting machine each process to avoid the waste of the process itself, such as: The equipment can open three plates at the same time at the same time, and the design of it into two plates, such as the drilling process, the hole position on a plate can be completed twice, and you will design it into three or four times, which will produce the waste of the process itself, which affects the processing efficiency, in order to do these first point is the corresponding process file, that is, the opening process must have the opening diagram. And to prepare the sawing sequence, the drilling process should have drilling drawings, and there should be different optimization drilling plans for different types of drilling, and it should be controlled in combination with working hours.

2, synchronization principle

The general direction of the parts of the CNC woodworking machine is based on the product, the small direction is based on the number of single packaging pieces of the product, and the parts are controlled as much as possible at the same time or in the smallest possible time difference to achieve the packaging process. The central content here is actually the working time of each part of the project product in the process table to be clear, accurate and maneuverable.

3. Principle of gradualism

A good process design is actually just the beginning of the next better process design, process design itself is a process of continuous exploration and improvement in practice, only better.

4. Quality principle

Any process in improving the efficiency can not be at the expense of product quality, because the quality of the product is the life of the product, in the premise of quality can be mass-produced.


标题
更多
标题
更多

微信公众号

Wechat public account

服务热线/Service Hotline:

158-5365-5568


地址:山东省高密市醴泉工业园

Add: Li Quan Industrial Park, Gaomi City, Shandong Province

  • 电话直呼

    • 15853655568
    • 17616735111
seo seo